Using Slurm

The resource allocation / scheduling software on Anunna is SLURM: Simple Linux Utility for Resource Management.

Queues and defaults

Quality of Service

When submitting a job, you may optionally assign a different Quality of Service to it. You can do this with:

SBATCH --qos=std

</source>

By default, jobs will use std, the standard quality.

Optionally, you may elect to reduce the priority of your jobs to low. This comes with a limit of how long each job can be (8h) to prevent the cluster from being locked up entirely with low priority jobs.

The high quality provides a higher priority to jobs (20) than std (10), or low (1). It is naturally more expensive.

The highest priority goes to jobs in interactive quality (100), but you may not submit many jobs or many large jobs as this quality. This is exclusively for the use of immediate running jobs, ones that are going to have hands-on users behind them.

Jobs may be restarted and rescheduled if a job with higher priority needs cluster resources, but as of right now, this is not occurring.

Queues

The cluster consists of multiple partitions of nodes that you can submit to. The primary one is 'main'. There are other partitions as needed - current plans include 'gpu'.

You can see the partitions available with `sinfo`:

Defaults

The default partition is 'main'. This will work for most jobs.

The default qos is 'std'.

The default cpu count is 1.

The default run time for a job is 1 hour.

The default memory limit is 100MB per node.

Submitting jobs: sbatch

Example

Consider this simple python3 script that should calculate Pi to 1 million digits: <source lang='python'> from decimal import * D=Decimal getcontext().prec=10000000 p=sum(D(1)/16**k*(D(4)/(8*k+1)-D(2)/(8*k+4)-D(1)/(8*k+5)-D(1)/(8*k+6))for k in range(411)) print(str(p)[:10000002]) </source>

Loading modules

In order for this script to run, the first thing that is needed is that Python3, which is not the default Python version on the cluster, is load into your environment. Availability of (different versions of) software can be checked by the following command:

 module avail

In the list you should note that python3 is indeed available to be loaded, which then can be loaded with the following command:

 module load python/3.3.3

Batch script

Main Article: Creating a sbatch script

The following shell/slurm script can then be used to schedule the job using the sbatch command: <source lang='bash'>

!/bin/bash
SBATCH --comment=773320000
SBATCH --time=1200
SBATCH --mem=2048
SBATCH --ntasks=1
SBATCH --output=output_%j.txt
SBATCH --error=error_output_%j.txt
SBATCH --job-name=calc_pi.py
SBATCH --mail-type=ALL
SBATCH --mail-user=email@org.nl

time python3 calc_pi.py </source>

Submitting

The script, assuming it was named 'run_calc_pi.sh', can then be posted using the following command: <source lang='bash'> sbatch run_calc_pi.sh </source>

Submitting multiple jobs (simple)

Assuming there are 10 job scripts, name runscript_1.sh through runscript_10.sh, all these scripts can be submitted using the following line of shell code: <source lang='bash'>for i in `seq 1 10`; do echo $i; sbatch runscript_$i.sh;done </source>

Submitting multiple jobs (complex)

Lets's say you have three job scripts that depend on each other:

<source lang='bash'>job_1.sh #A simple initialisation script</source> <source lang='bash'>job_2.sh #An array task</source> <source lang='bash'>job_3.sh #Some finishing script, single run, after everything previous has finished</source>

You can create a script to simultaneously submit each job with a dependency on each other:

<source lang='bash'>#!/bin/bash JOB1=$(sbatch job_1.sh| rev | cut -d ' ' -f 1 | rev) #Get me the last space-separated element

if ! [ "z$JOB1" == "z" ] ; then

 echo "First job submitted as jobid $JOB1"
 JOB2=$(sbatch --dependency=afterany:$JOB1 job_2.sh| rev | cut -d ' ' -f 1 | rev)

 if ! [ "z$JOB2" == "z" ] ; then
 echo "Second job submitted as jobid $JOB2, following $JOB1"
 JOB3=$(sbatch --dependency=afterany:$JOB2 job_3.sh| rev | cut -d ' ' -f 1 | rev)

 if ! [ "z$JOB3" == "z" ] ; then
 echo "Third job submitted as jobid $JOB3, following after every element of $JOB2"

 fi
fi

fi </source>

This will ensure that the subsequent jobs occur after any finishing of the former (even if they failed).

Please see the sbatch documentation for other options available to you. Note that aftercorr makes a subsequent array jobs array elements start after the correspondingly numbered ones from the previous job.

Submitting array jobs

SBATCH --array=0-10%4

</source> SLURM allows you to submit multiple jobs using the same template. Further information about this can be found here.

Using /tmp

There is a local disk of ~300G that can be used to temporarily stage some of your workload attached to each node. This is free to use, but please remember to clean up your data after usage.

In order to be sure that you're able to use space in /tmp, you can add <source lang='bash'>

SBATCH --tmp=<required size>

</source> To your sbatch script. This will prevent your job from being run on nodes where there is no free space, or it's aimed to be used by another job at the same time.

Using GPU

There are two GPU nodes, in order to run a job that uses GPU on one of these nodes, you can add

SBATCH --reservation='GPU'

</source> To your sbatch script. Without this parameter, your job won't run on one of these nodes.

THIS IS PRONE TO CHANGE SHORTLY! Dawes001 (talk) 14:57, 15 July 2019 (UTC)

Monitoring submitted jobs

Once a job is submitted, the status can be monitored using the squeue command. The squeue command has a number of parameters for monitoring specific properties of the jobs such as time limit.

Generic monitoring of all running jobs

 squeue

</source>

You should then get a list of jobs that are running at that time on the cluster, for the example on how to submit using the 'sbatch' command, it may look like so:

   JOBID PARTITION     NAME     USER  ST       TIME  NODES NODELIST(REASON)
  3396      ABGC BOV-WUR- megen002   R      27:26      1 node004
  3397      ABGC BOV-WUR- megen002   R      27:26      1 node005
  3398      ABGC BOV-WUR- megen002   R      27:26      1 node006
  3399      ABGC BOV-WUR- megen002   R      27:26      1 node007
  3400      ABGC BOV-WUR- megen002   R      27:26      1 node008
  3401      ABGC BOV-WUR- megen002   R      27:26      1 node009
  3385  research BOV-WUR- megen002   R      44:38      1 node049
  3386  research BOV-WUR- megen002   R      44:38      1 node050
  3387  research BOV-WUR- megen002   R      44:38      1 node051
  3388  research BOV-WUR- megen002   R      44:38      1 node052
  3389  research BOV-WUR- megen002   R      44:38      1 node053
  3390  research BOV-WUR- megen002   R      44:38      1 node054
  3391  research BOV-WUR- megen002   R      44:38      3 node[049-051]
  3392  research BOV-WUR- megen002   R      44:38      3 node[052-054]
  3393  research BOV-WUR- megen002   R      44:38      1 node001
  3394  research BOV-WUR- megen002   R      44:38      1 node002
  3395  research BOV-WUR- megen002   R      44:38      1 node003

Monitoring time limit set for a specific job

The default time limit is set at one hour. Estimated run times need to be specified when running jobs. To see what the time limit is that is set for a certain job, this can be done using the squeue command. <source lang='bash'> squeue -l -j 3532 </source> Information similar to the following should appear:

 Fri Nov 29 15:41:00 2013
  JOBID PARTITION     NAME     USER    STATE       TIME TIMELIMIT  NODES NODELIST(REASON)
  3532      ABGC BOV-WUR- megen002  RUNNING    2:47:03 3-08:00:00      1 node054

Query a specific active job: scontrol

Show all the details of a currently active job, so not a completed job. <source lang='bash'> login ~]$ scontrol show jobid 4241 JobId=4241 Name=WB20F06

  UserId=megen002(16795409) GroupId=domain users(16777729)
  Priority=1 Account=(null) QOS=normal
  JobState=RUNNING Reason=None Dependency=(null)
  Requeue=1 Restarts=0 BatchFlag=1 ExitCode=0:0
  RunTime=02:55:25 TimeLimit=3-08:00:00 TimeMin=N/A
  SubmitTime=2013-12-09T13:37:29 EligibleTime=2013-12-09T13:37:29
  StartTime=2013-12-09T13:37:29 EndTime=2013-12-12T21:37:29
  PreemptTime=None SuspendTime=None SecsPreSuspend=0
  Partition=research AllocNode:Sid=login0:21799
  ReqNodeList=(null) ExcNodeList=(null)
  NodeList=node023
  BatchHost=node023
  NumNodes=1 NumCPUs=4 CPUs/Task=1 ReqS:C:T=*:*:*
  MinCPUsNode=1 MinMemoryNode=0 MinTmpDiskNode=0
  Features=(null) Gres=(null) Reservation=(null)
  Shared=OK Contiguous=0 Licenses=(null) Network=(null)
  Command=/lustre/scratch/WUR/ABGC/...
  WorkDir=/lustre/scratch/WUR/ABGC/...

</source>

Check on a pending job

A submitted job could result in a pending state when there are not enough resources available to this job. In this example I sumbit a job, check the status and after finding out is it pending I'll check when is probably will start. <source lang='bash'> [@login jobs]$ sbatch hpl_student.job

Submitted batch job 740338

[@login jobs]$ squeue -l -j 740338

Fri Feb 21 15:32:31 2014
 JOBID PARTITION     NAME     USER    STATE       TIME TIMELIMIT  NODES NODELIST(REASON)
740338 ABGC_Stud HPLstude bohme999  PENDING       0:00 1-00:00:00      1 (ReqNodeNotAvail)

[@login jobs]$ squeue --start -j 740338

 JOBID PARTITION     NAME     USER  ST           START_TIME  NODES NODELIST(REASON)
740338 ABGC_Stud HPLstude bohme999  PD  2014-02-22T15:31:48      1 (ReqNodeNotAvail)

</source> So it seems this job will problably start the next day, but's thats no guarantee it will start indeed.

Removing jobs from a list: scancel

If for some reason you want to delete a job that is either in the queue or already running, you can remove it using the 'scancel' command. The 'scancel' command takes the jobid as a parameter. For the example above, this would be done using the following code: <source lang='bash'> scancel 3401 </source>

Allocating resources interactively: sinteractive

sinteractive is a tiny wrapper on srun to create interactive jobs quickly and easily. It allows you to get a shell on one of the nodes, with similar limits as you would do for a normal job. To use it, simply run: <source lang='bash'> sinteractive -c <num_cpus> --mem <amount_mem> --time <minutes> -p <partition> </source> You will then be presented with a new shell prompt on one of the compute nodes (run 'hostname' to see which!). From here, you can test out code in an interactive fashion as needs be.

Be advised though - not filling in the above fields will get you a shell with 1 CPU and 100Mb of RAM for 1 hour. This is useful for quick testing, however.

sinteractive source

!/bin/bash

srun "$@" -I60 -N 1 -n 1 --pty bash -i </source>

interactive Slurm - using salloc

If you don't want your shell to be transported but want a new remote shell, do: <source lang='bash'> salloc -p ABGC_Low $SHELL </source> Now your shell will stay on the login node, but you can do: <source lang='bash'> srun <command> & </source> To submit tasks to this new shell!

Be aware that the time limit of salloc is default 1 hour. If you intend to run jobs for longer times than this, you need to edit the settings for it. See: https://computing.llnl.gov/linux/slurm/salloc.html

Get overview of past and current jobs: sacct

To do some accounting on past and present jobs, and to see whether they ran to completion, you can do: <source lang='bash'> sacct </source> This should provide information similar to the following:

        JobID    JobName  Partition    Account  AllocCPUS      State ExitCode 
 ------------ ---------- ---------- ---------- ---------- ---------- -------- 
 3385         BOV-WUR-58   research                    12  COMPLETED      0:0 
 3385.batch        batch                                1  COMPLETED      0:0 
 3386         BOV-WUR-59   research                    12 CANCELLED+      0:0 
 3386.batch        batch                                1  CANCELLED     0:15 
 3528         BOV-WUR-59       ABGC                    16    RUNNING      0:0 
 3529         BOV-WUR-60       ABGC                    16    RUNNING      0:0

Or in more detail for a specific job: <source lang='bash'> sacct --format=jobid,jobname,comment,partition,ntasks,alloccpus,elapsed,state,exitcode -j 4220 </source> This should provide information about job id 4220:

      JobID    JobName    Comment   Partition   NTasks  AllocCPUS    Elapsed      State ExitCode 
 ------------ ---------- ---------- ---------- -------- ---------- ---------- ---------- -------- 
 4220         PreProces+              research                   3   00:30:52  COMPLETED      0:0 
 4220.batch        batch                              1          1   00:30:52  COMPLETED      0:0

Job Status Codes

Typically your job will be either in the Running state of PenDing state. However here is a breakdown of all the states that your job could be in.

Code	State	Description
CA	CANCELLED	Job was explicitly cancelled by the user or system administrator. The job may or may not have been initiated.
CD	COMPLETED	Job has terminated all processes on all nodes.
CF	CONFIGURING	Job has been allocated resources, but are waiting for them to become ready for use (e.g. booting).
CG	COMPLETING	Job is in the process of completing. Some processes on some nodes may still be active.
F	FAILED	Job terminated with non-zero exit code or other failure condition.
NF	NODE_FAIL	Job terminated due to failure of one or more allocated nodes.
PD	PENDING	Job is awaiting resource allocation.
R	RUNNING	Job currently has an allocation.
S	SUSPENDED	Job has an allocation, but execution has been suspended.
TO	TIMEOUT	Job terminated upon reaching its time limit.

Running MPI jobs on Anunna

Main article: MPI on Anunna

External links

Using Slurm

Contents

Queues and defaults

Quality of Service

Queues

Defaults

Submitting jobs: sbatch

Example

Loading modules

Batch script

Submitting

Submitting multiple jobs (simple)

Submitting multiple jobs (complex)

Submitting array jobs

Using /tmp

Using GPU

Monitoring submitted jobs

Generic monitoring of all running jobs

Monitoring time limit set for a specific job

Query a specific active job: scontrol

Check on a pending job

Removing jobs from a list: scancel

Allocating resources interactively: sinteractive

sinteractive source

interactive Slurm - using salloc

Get overview of past and current jobs: sacct

Running MPI jobs on Anunna

See also

External links

Navigation menu

Using Slurm

Queues and defaults

Quality of Service

Queues

Defaults

Submitting jobs: sbatch

Example

Loading modules

Batch script

Submitting

Submitting multiple jobs (simple)

Submitting multiple jobs (complex)

Submitting array jobs

Using /tmp

Using GPU

Monitoring submitted jobs

Generic monitoring of all running jobs

Monitoring time limit set for a specific job

Query a specific active job: scontrol

Check on a pending job

Removing jobs from a list: scancel

Allocating resources interactively: sinteractive

sinteractive source

interactive Slurm - using salloc

Get overview of past and current jobs: sacct

Running MPI jobs on Anunna

See also

External links

Navigation menu

Search